Installation program hangs forever with a 'Please Wait...' message.
The installation program begins running in a window. Windows 95 (98) then switches it to full-screen mode temporarily for the logo screen, and then puts it back into a window. This last mode switch is handled incorrectly, and Windows 95 (98) stops updating the window, causing the program to appear to have hung on a message saying “Please Wait...”.
At any point while running the installation program, simply press ALT+ENTER to tell Windows to switch the program to full-screen mode. The screen will be updated and program execution will continue from where it left off.
This incompatibility is corrected in the latest version of the ZONG for DOS Installer (ZONG 1.21 or above).
This article was last reviewed on 08 Oct 2000.
If you have a problem that you cannot resolve through our Support section, please write to Zensoft Customer Support.
Important Note: If you write to us because your issue is not listed on our web site, that means your problem is not a common one. Therefore, we need as much detail as you can give us. Be as thorough as possible in describing the problem so that we are able to help you as quickly as possible.